FWU mixing units are compact devices designed for smooth
performance control (control of an analog signal 0...10V) and protection
of a liquid heat exchanger by changing the input temperature of the coolant at
its constant flow rate

OUR NODES ARE EASY TO CONNECT

• Before installation, it is necessary to check the condition of the components of the mixing unit, the heat exchanger, and the insulation of the actuator wires..

• Install the mixing unit in such a way that the filter sump is directed downward, otherwise there is a risk of increased clogging of the filter mesh, which will lead to a decrease in the power of the heat exchanger and the risk of freezing.

• Присоединить нержавеющие трубки смесительного узла к теплообменнику.

• Attach the stainless tubes of the mixing unit to the heat exchanger.

• Connect the tubes from the boiler to the ball shut-off valves.

OUR NODES DO NOT LEAK!

All ready-made mixing units FWU are crimped at a liquid pressure of 10 atmospheres, which guarantees the absence of leaks during further operation. Thanks to this, FWU mixing units provide a high standard of quality, guaranteeing reliable and trouble-free operation of water heat exchangers.